Ciena 180-3360-900 Compatible 400G QSFP-DD Transceiver Module

Product Highlights

• Compatible alternative to Ciena 180-3360-900
• 400G connectivity at 100G-31.5Gbaud（OTN STD） 200G-31.5Gbaud（OTN STD） 200G-63 Gbaud（OTN STD） 400G-63 Gbaud（OTN STD） 400G ZR 400G ZR+
• Optical wavelength: 1528.58-1567.54nm
• Specified reach: 400G ZR：120km 400G ZR+：1000km 100G-31.5Gbaud（OTN STD）：3300km 200G-31.5Gbaud（OTN STD）：800km 200G-63 Gbaud（OTN STD）：3000km 400G-63 Gbaud（OTN STD）：1300km
• Duplex LC/UPC / SMF interface
• Digital diagnostic monitoring: Support
• Operating temperature: 0℃ to 75°C

Specifications

Applications and Optical Link Design

This coherent interface is suited to data-center interconnect, metro transport and managed DWDM links where the host platform supports the stated modulation and FEC modes. Design the optical line around the actual launch power, receiver range, OSNR requirement and span loss; the stated reach is not a substitute for a link-budget calculation. Use matching coherent modules and the appropriate DWDM channel plan at both ends.

Before deployment, check the host port type, supported data rate and firmware requirements. The 400G interface configuration must match the remote equipment; sharing a QSFP-DD housing alone does not make two transceiver types interoperable.

For this coherent interface, document the wavelength plan and modulation or FEC settings before commissioning. Measure span loss and verify adequate OSNR. Interoperability depends on compatible coherent modes as well as form factor, so another coherent part number must not be substituted without engineering review.

Optical Acceptance, Diagnostics and Handling

Use the electrical and optical limits in the specification table as the acceptance reference for this model. A sound acceptance record includes link state, diagnostic temperature, supply voltage and transmit or receive levels where the host exposes them. Compare the readings with the stated ranges rather than treating any received light as proof of adequate margin. Persistent alarms or borderline values should trigger an end-face and complete-channel inspection. Diagnostic monitoring is listed as Support. Before every insertion, keep dust caps in place until the patch lead is ready, avoid touching the optical end face and use an appropriate inspection and cleaning procedure. Do not look into an active optical interface.

Procurement and Asset Identification

A useful purchase order identifies the host platform, expected OEM code and optical standard separately. This prevents a module with the same housing but another wavelength, reach or identification profile from being substituted. For mixed deployments, keep one order line per OEM reference and reconcile each received unit with its intended port. For this model, the principal parameters are data rate 100G-31.5Gbaud（OTN STD） 200G-31.5Gbaud（OTN STD） 200G-63 Gbaud（OTN STD） 400G-63 Gbaud（OTN STD） 400G ZR 400G ZR+, wavelength 1528.58-1567.54nm, rated reach 400G ZR：120km 400G ZR+：1000km 100G-31.5Gbaud（OTN STD）：3300km 200G-31.5Gbaud（OTN STD）：800km 200G-63 Gbaud（OTN STD）：3000km 400G-63 Gbaud（OTN STD）：1300km.

Ciena Compatibility and Factory Testing

The module is checked for host recognition as 180-3360-900, link establishment and diagnostic reporting. Physical cage fit alone is not treated as evidence of compatibility. Equipment model, hardware revision and software release can be reviewed before dispatch where platform behavior is uncertain.

Ordering Information

When ordering, specify 180-3360-900, QDD-ZRPH-400GM, quantity and intended host platform. Project labels can repeat these details for receiving and asset records. Neutral labels, customer packaging and project-specific compatibility review are available on request.

Quality Assurance and Packaging

Quality control covers the optical or electrical interface, host identification and operating link. The verified unit is then individually protected and cartoned. Customer references, rack groups and project packing lists can be added for volume orders.

Frequently Asked Questions

Shipping and Lead Time

Standard configurations normally ship within one to three working days, with production lead times confirmed for larger quantities. International courier, air freight and sea freight are available; customer courier accounts and nominated forwarders are accepted.