Cisco CWDM-SFP10G-1510 Compatible 10G CWDM SFP+ Transceiver (Single mode Fiber, 1510nm, 80km, LC, DOM)
Transceiver specs
| Cisco genuine P/N | CWDM-SFP10G-1510 | Manufacturer name | Fiber Optic Kenya |
| Transceiver Type | SFP+ | designed for | 11.0957Gbps |
| Wavelength | 1510nm | Max transmission | 80km |
| Interface | LC duplex | Optical Components | DFB CWDM |
| Cable Type | Single mode Fiber | DOM/DDM | Yes |
| TX Power | 0~4dBm | Receiver Sensitivity | |
| working temp | 0 to 70C (32 to 158F) | HS Code Number | 8517706000 |
Transceiver usage
Cisco CWDM-SFP10G-1510 is made to work with many platforms of Cisco equipment.
Cisco ASR 9000 A9K-24X10GE-SE
Cisco WS-C3850-24T
Cisco WS-C3850-24XS
Cisco WS-C3850-48T
Cisco WS-C3850-48XS-S
Cisco Nexus 9000 N9K-X9564PX
Cisco WS-C3650-48PQ
Cisco Nexus 9000 N9K-C9396PX
Cisco WS-C3850-32XS
Cisco WS-C3850-24S
Cisco WS-C3850-48P
Cisco WS-C3850-12S
Cisco WS-C3850-12XS
Cisco WS-C3650-48FD
Cisco WS-C3650-24PD
Cisco WS-C3850-24P
Cisco WS-C3850-48XS-F-S
Cisco ASR 9000 A9K-36X10GE-SE
|
Cisco WS-C3850-48XS-ECisco ASR 9000 A9K-24X10GE-TRCisco WS-C3650-24TDCisco WS-C3650-48TQCisco WS-C3650-48FQCisco ME-3600X-24cs-M (SFP ports)Cisco Nexus 9000 N9K-X9464PXCisco Nexus 9000 N9K-C9372PXCisco WS-C3850-48XSCisco ASR 9000 A9K-MPA-8X10GECisco WS-C3850-48FCisco WS-C3650-48PDCisco WS-C3850-16XSCisco ASR 9000 A9K-36X10GE-TRCisco Nexus 9000 N9K-C9372PX-ECisco ASR 9000 ASR-9001
Cisco WS-C3650-48TDCisco WS-C3850-48XS-F-E
|
Cisco Nexus 9300 Series (Switch/Module : N9K-C9396PX; Uplink Module : N9K-M12PQ )
Cisco ASR 9000 Series (Modular Line Card : A9K-MPA-8X10GE)
Spectral Attenuation Measurement
In fiber-optic communications, Coarse Wavelength Division Multiplexing (CWDM), a WDM technology which multiplexes a number of optical carrier signals onto a single optical fiber by using different wavelengths (i.e., colors) of laser light. Effective CWDM realizations with uncooled lasers and wide passband filters a nominal central wavelength spacing of not less than 20nm. Total source wavelength variation of the order of ± 6-7nm is expected to be compatible with current filter technologies. In 2002 the ITU standardized a channel spacing grid for use with CWDM (ITU-T G.694.2), using the wavelengths from 1270nm through 1610nm with a channel spacing of 20nm. Many CWDM wavelengths below 1470nm are considered "unusable" on older G.652 (dotten line) specification fibers, due to the increased attenuation in the 1270–1470nm bands. Newer fibers which conform to the G.652.C and G.652.D (full line) standards, such as Corning Single mode Fiber-28e and Samsung Widepass nearly eliminate the "water peak" attenuation peak and allow for full operation of all 18 ITU CWDM channels in metropolitan networks.
Fiber Optic Transceivers Kenya
Professional Fiber Optic Supplier
Fiber Optic Kenya is a professional manufacturer of high-speed fiber optic data storage and networking cables. We offer a wide selection of varying lengths of SFP+ Cables, QSFP+ Cables, XFP Cables, Mini SAS Cables, CX4 Cables, Infiniband Cables, QSFP+ AOC cables and many fiber optic cable assemblies and management units. Thanks to our factory in China, we are able to provide customers low cost and high quality fiber optic products. Our goal is to provide each customer an easy buying experience and fast order fulfillment, as well as excellent services. Fiber Optic Kenya is your ideal choice for your fiber optic products needs.
Lowest Price and High Quality
With our China factory supported, Fiber Optic Kenya price is rather competitive. We believe in "small profits and quick turnover". Every cable undergoes the strict testing and quality control procedure, to make sure each cable purchased meets global quality standards. All cables we sell have passed Rohs and CE. Fiber Optic Kenya offers only the highest quality products, allowing customers to buy with confidence. here you get the low price and very reliable quality.
