This 12-144 Fibers (Base-12) MPO Female/Male trunk assembly is built for backbone cabling between racks, rows and distribution frames. OS2 9/125μm fiber, Plenum (OFNP)/LSZH jacket and factory installed pulling protection make it a one-pull replacement for hours of field termination work.
Available lengths are 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.
Product Highlights
- MPO Female/Male to MPO Female/Male, 12-144 Fibers (Base-12)
- OS2 9/125μm, G.657.A1
- Insertion loss ≤0.35dB, return loss ≥60dB
- Type A/Type B/Type C polarity
- Plenum (OFNP)/LSZH
- Minimum bend radius 10mm
- Stock lengths from 2m (7ft) to 30m (98ft), custom lengths on request
Specifications
| Part Number | AM-XXFMPOSMF |
|---|---|
| Manufacturer | HT |
| Connector A | MPO Female/Male |
| Connector B | MPO Female/Male |
| Fiber Mode | OS2 9/125μm |
| Wavelength | 1310/1550nm |
| Glass Fiber | G.657.A1 |
| Minimum Bend Radius | 10mm |
| Polish Type | APC to APC |
| Polarity | Type A/Type B/Type C |
| Cable Jacket | Plenum (OFNP)/LSZH |
| Cable Structure | Double Jacket |
| Fiber Count | 12-144 Fibers (Base-12) |
| Trunk Outside Diameter (OD) | 4.5-14.2mm |
| Breakout Outside Diameter (OD) | 2.0mm |
| Breakout Length | 0.84m |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥60dB |
| Attenuation at 1310nm | ≤0.35dB/km |
| Attenuation at 1550nm | ≤0.21dB/km |
| Long-term Tensile Load | 200N |
| Short-term Tensile Load | 660N |
| Operating Temperature | OFNP: -10 to 60°C (14 to 140°F)LSZH: -10 to 70°C (14 to 158°F) |
| Storage Temperature | OFNP: -10 to 70°C (14 to 158°F)LSZH: -20 to 70°C (-4 to 158°F) |
Applications
Install this trunk wherever many fibers must move between two termination points at once. A 12-fiber MPO interface carries 8 active lanes for 40G SR4 and 100G SR4 links, leaving the remaining 4 fibers dark, exactly as the MSA wiring specifies. The assembly is shipped on a reel or coil with pulling protection, ready for a single pull through trays and conduits.
Trunk Construction and Polarity
Inside the outer jacket, the fibers are grouped into sub-units that fan out to individually labeled connectors. This protects the fibers during pulling and keeps the breakout area compact at the panel. Type A, B and C polarity and male or female connectors are built to your panel schedule.
Ordering Information
To order, quote AM-XXFMPOSMF together with the length and quantity you need. Private labeling, custom packaging and project specific documentation are all handled in-house.
Quality and Testing
Every MPO/MTP assembly leaving our factory is 100% tested for insertion loss and return loss, with end face geometry checks on the multi-fiber ferrules. Controlled polishing keeps the loss budget stable across the whole batch, which matters when several mated pairs sit in one link.
How We Pack
Each assembly is coiled, capped and sealed in an individual bag, then packed into foam lined export cartons. Test reports can be attached per unit or per batch, and carton marks follow your shipping instructions.
Built to Your Spec
We have manufactured fiber optic assemblies since 1995. MPO and MTP cabling is one of our core lines: fiber counts from 8 to 144, single mode and multimode, UPC and APC polish, trunk, jumper, harness and breakout formats. Send your drawing and we turn it into a ready to install assembly.