Factory built MTP®-16 APC with Offset Key breakout assembly with Customized MTP Breakout Cable, 16F, Crossover, OM4 on OM4 50/125μm fiber. The main trunk stays one cable until the fan-out point, which keeps pathways clear and makes moves and changes much easier to trace.
Available lengths are 1m (3ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.
Product Highlights
- MTP®-16 APC with Offset Key to MTP®-8 UPC,
- OM4 50/125μm, bend insensitive fiber
- Insertion loss ≤0.35dB, return loss ≥27/45dB (UPC/APC)
- Crossover polarity
- 3.0mm Plenum (OFNP)/LSZH round cable
- Minimum bend radius 7.5mm
- Stock lengths from 1m (3ft) to 30m (98ft), custom lengths on request
Specifications
| Part Number | 16FMTPOM4 |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MTP®-16 APC with Offset Key |
| Connector B | US Conec MTP®-8 UPC |
| Fiber Mode | OM4 50/125μm |
| Wavelength | 850/1300nm |
| Glass Fiber | Bend Insensitive Fiber |
| Polarity | Crossover |
| Insertion Loss | ≤0.35dB |
| Return Loss | ≥27/45dB (UPC/APC) |
| Attenuation at 850nm | ≤2.3dB/km |
| Attenuation at 1300nm | ≤0.6dB/km |
| Cable Jacket | Plenum (OFNP)/LSZH |
| Minimum Bend Radius | 7.5mm |
| Cable Outside Diameter (OD) | 3.0mm |
| Breakout Length | 0.5m |
| Installation Tensile Load | 66N |
| Tensile Strength | 60/120N (Long/Short Term) |
| Operating Temperature | OFNP: -10 to 60°C (14 to 140°F)LSZH: -10 to 70°C (14 to 158°F) |
| Storage Temperature | OFNP: -10 to 70°C (14 to 158°F)LSZH: -20 to 70°C (-4 to 158°F) |
Applications
This breakout is used wherever one multi-fiber interface must serve several devices. The factory controlled fan-out keeps each leg at the right length and polarity, avoiding the tangle of separate patch cords.
Breakout Geometry and Wiring
Each breakout leg is individually jacketed, labeled and measured, and the transition from trunk to legs is protected against pulling forces. If your installation needs different leg lengths or a different lane mapping, we can build it to your drawing.
Ordering Information
Please reference 16FMTPOM4 in your enquiry. Our sales team can also advise on polarity, gender and jacket choices if your project documentation is not final yet.
Built to Your Spec
Our engineering team handles custom MPO/MTP assemblies daily. If the standard configuration does not match your link design, send us the requirement and we will build exactly what your network needs at factory-direct cost.
Logistics
Most orders leave our facility within a few working days. Courier, air freight and sea freight are all available, and we are happy to hand goods to your nominated forwarder in China.
How We Pack
Every cable is protected with dust caps and individual packaging before being boxed for shipment. Batch test reports and your own part number labels can be included in each bag.