Generic DW-SFP10G80-C-I Compatible 10G SFP+ Transceiver Module 80km 1529.16nm-1560.61nm (Tunable)
This Generic DW-SFP10G80-C-I compatible transceiver provides 10G connectivity in a hot-swappable SFP+ package. Its optical design operates at 1529.16nm-1560.61nm (Tunable) for up to 80km, using Duplex LC. Complete parameters and related OEM references help procurement teams match an equipment parts list to a clearly defined optical product.
OEM Part Number: DW-SFP10G80-C-IHT Part Number: DW-SFP10G80-C-I
Product Highlights
- Compatible alternative to Generic DW-SFP10G80-C-I
- 10G connectivity at 11.3Gbps
- Optical wavelength: 1529.16nm-1560.61nm (Tunable)
- Specified reach: 80km
- Duplex LC / SMF interface
- Operating temperature: -40~85°C (-40 to 185°F)
- Factory compatibility verification and optical performance testing before shipment
Specifications
| HT Part Number | DW-SFP10G80-C-I |
|---|---|
| Manufacturer | HT |
| Form Factor | SFP+ |
| Max Data Rate | 11.3Gbps |
| Connector | Duplex LC |
| Max Cable Distance | 80km |
| Media | SMF |
| Wavelength | 1529.16nm-1560.61nm (Tunable) |
| Modulation | NRZ |
| Power Consumption | ≤2.5W |
| Transmitter Type | Tunable MZM |
| Receiver Type | APD |
| Power Budget | ≥23dB |
| Extinction Ratio | 8.2dB |
| CDR | Yes |
| BER | 1E-12 |
| TX Power | -1~3dBm |
| Receiver Overload | -7dBm |
| EMC (Electro Magnetic Compatibility) | Supported |
| DDM/DOM Support | Yes |
| Industrial Temperature Range | -40~85°C (-40 to 185°F) |
| Inbuilt FEC | Yes |
| Protocols | SFF-8431 Rev4.1, SFF-8432 Rev5.0, SFF-8472 Rev12.2, SFF-8690 Rev1.5 |
| Application | 10Gb/s SONET/SDH, 10G Ethernet, 10G Fibre Channel |
Applications and Optical Link Design
This coherent interface is suited to data-center interconnect, metro transport and managed DWDM links where the host platform supports the stated modulation and FEC modes. Design the optical line around the actual launch power, receiver range, OSNR requirement and span loss; the stated reach is not a substitute for a link-budget calculation. Use matching coherent modules and the appropriate DWDM channel plan at both ends.
The industrial temperature rating makes this version appropriate for controlled outdoor cabinets, transport nodes and other installations exposed to wider ambient temperature variation. Adequate airflow, protected cable routing and host-platform temperature limits still apply.
For this coherent interface, document the wavelength plan and modulation or FEC settings before commissioning. Measure span loss and verify adequate OSNR. Interoperability depends on compatible coherent modes as well as form factor, so another coherent part number must not be substituted without engineering review.
Optical Acceptance, Diagnostics and Handling
For this model, the specified transmit-power range is -1~3dBm; the stated optical power budget is ≥23dB. During commissioning, record the host diagnostic readings after the link has stabilized and compare them with those limits. DOM values are useful operational indicators, but they do not replace calibrated optical measurements when a link is marginal. Investigate unexpected loss through connector inspection, cleaning and a channel measurement before replacing the module. Before every insertion, keep dust caps in place until the patch lead is ready, avoid touching the optical end face and use an appropriate inspection and cleaning procedure. Do not look into an active optical interface.
Procurement and Asset Identification
A useful purchase order identifies the host platform, expected OEM code and optical standard separately. This prevents a module with the same housing but another wavelength, reach or identification profile from being substituted. For mixed deployments, keep one order line per OEM reference and reconcile each received unit with its intended port. For this model, the principal parameters are data rate 11.3Gbps, wavelength 1529.16nm-1560.61nm (Tunable), rated reach 80km.
Generic Compatibility and Factory Testing
Factory verification starts with the expected DW-SFP10G80-C-I identity and finishes with an operating host link. EEPROM data, diagnostic visibility and the stated optical parameters are assessed together. Equipment model, hardware revision and software release can be reviewed before dispatch where platform behavior is uncertain.
Ordering Information
When ordering, specify DW-SFP10G80-C-I, DW-SFP10G80-C-I, quantity and intended host platform. Project labels can repeat these details for receiving and asset records. Neutral labels, customer packaging and project-specific compatibility review are available on request.
Quality Assurance and Packaging
Before packing, the module receives interface inspection, identification and link checks. Protective packaging avoids pressure on the connector and latch. Customer references, rack groups and project packing lists can be added for volume orders.
Frequently Asked Questions
Is this an original equipment manufacturer transceiver?
No. It is an HT-manufactured compatible transceiver supplied under our own manufacturer identity, not an original equipment manufacturer module.
Which fiber and connector are required?
Use Duplex LC with SMF. The specified maximum reach is 80km, subject to fiber quality and total link loss.
Can it be mixed with another wavelength or reach version?
Only when the two ends share the same optical standard, wavelength plan and supported data rate. Check the exact part numbers and link budget rather than relying only on the module form factor.
Shipping and Lead Time
Standard configurations normally ship within one to three working days, with production lead times confirmed for larger quantities. International courier, air freight and sea freight are available; customer courier accounts and nominated forwarders are accepted.