For short reach 850Gbps (8x 106.25Gbps) links in InfiniBand NDR fabrics, GPU clusters and AI training networks, the 800G OSFP Twin-port OSFP IHS/Finned Top to 4 x 200G OSFP RHS/Flat Top Active Copper Breakout DAC Cable offers a factory terminated active breakout dac (acc) assembly with OSFP (IHS/Finned Top) to 4x OSFP (RHS/Flat Top) connectors and a length of 1-5m (3ft-16ft). Active electronics inside the connectors extend the usable reach compared with passive copper while keeping power draw low. The cable meets CMIS 5.0, IEEE 802.3ck, OSFP MSA Rev 5.0.
Product Highlights
- OSFP (IHS/Finned Top) to 4x OSFP (RHS/Flat Top)
- Data rate: 850Gbps (8x 106.25Gbps)
- Cable type: Active Breakout DAC (ACC)
- Length: 1-5m (3ft-16ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFP-800G-4OFLACxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | OSFP (IHS/Finned Top) to 4x OSFP (RHS/Flat Top) |
| Max. Data Rate | 850Gbps (8x 106.25Gbps) |
| Media | Copper |
| Cable Type | Active Breakout DAC (ACC) |
| Cable Length | 1-5m (3ft-16ft) |
| Wire AWG | 26-30AWG |
| Minimum Bend Radius | 23-32.5mm |
| Max. Power Consumption | 1.7W (800G End) 0.3W (200G Per End) |
| Jacket Material | PET |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation Format | 8x100G-PAM4 to Quad 2x100G-PAM4 |
| Application | 800G/200G Ethernet/InfiniBand |
| Protocols | CMIS 5.0, IEEE 802.3ck, OSFP MSA Rev 5.0 |
Applications
The 800G OSFP Twin-port OSFP IHS/Finned Top to 4 x 200G OSFP RHS/Flat Top Active Copper Breakout DAC Cable connects OSFP (IHS/Finned Top) to 4x OSFP (RHS/Flat Top) ports at 850Gbps (8x 106.25Gbps) in InfiniBand NDR fabrics, GPU clusters and AI training networks. This unit is supplied at 1-5m (3ft-16ft). By fanning one port out to 4x OSFP (RHS/Flat Top), it doubles or quadruples the number of endpoints served per switch port and keeps the cabling plant simple. If your project needs a specific vendor coding or custom label, our production line handles it as a routine step before packing. The link runs 8x100G-PAM4 to Quad 2x100G-PAM4 modulation, which keeps it aligned with current 800G switch silicon.
Standards and Compatibility
Standards compliance covers CMIS 5.0, IEEE 802.3ck, OSFP MSA Rev 5.0. The unit works in any equipment with a standard OSFP (IHS/Finned Top) to 4x OSFP (RHS/Flat Top) interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
This model is supplied at 1-5m (3ft-16ft) under part number OSFP-800G-4OFLACxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 26-30AWG.
Logistics
Our warehouse keeps fast-moving transceivers and cables ready for same-week dispatch. Courier, air freight and sea freight options are all available depending on your budget and schedule, and we consolidate multiple items into one shipment whenever it saves you cost.
Quality and Testing
Every unit we ship is tested in our own test bed on mainstream switch and transport platforms before packing. Our test center has been fully upgraded, which sets us apart from other third party product providers: 10G, 40G, 100G, 200G and 400G transceivers and direct attach cables are verified on the latest top brand equipment, including selected original switches that can hardly be found elsewhere.
Packing Details
Standard packing is an anti-static bag plus blister protection, with cartons sized to keep products from moving in transit. We apply our standard labels by default; neutral packing or customer-branded labels, part number stickers and serial barcodes are all available on request.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.