The 800G OSFP Twin-port OSFP IHS/Finned Top to Twin-port OSFP RHS/Flat Top Active DAC Cable provides an 800Gbps (8x 106.25Gbps) copper connection between 800G OSFP (IHS/Finned Top) to 800G OSFP (RHS/Flat Top) ports with a cable length of 1-5m (3ft-16ft). Active electronics inside the connectors extend the usable reach compared with passive copper while keeping power draw low. Direct attach copper keeps both latency and power consumption to a minimum, which makes it the economical choice for InfiniBand NDR fabrics, GPU clusters and AI training networks.
Product Highlights
- 800G OSFP (IHS/Finned Top) to 800G OSFP (RHS/Flat Top)
- Data rate: 800Gbps (8x 106.25Gbps)
- Cable type: Active DAC (ACC)
- Length: 1-5m (3ft-16ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFP-800G-OFLACxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | 800G OSFP (IHS/Finned Top) to 800G OSFP (RHS/Flat Top) |
| Max. Data Rate | 800Gbps (8x 106.25Gbps) |
| Media | Copper |
| Cable Type | Active DAC (ACC) |
| Cable Length | 1-5m (3ft-16ft) |
| Wire AWG | 26-30AWG |
| Minimum Bend Radius | 48.5-59.5mm |
| Max. Power Consumption | 1.3W Per End |
| Jacket Material | PET |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation Format | 8x100G-PAM4 |
| Application | 800G Ethernet/InfiniBand |
| Protocols | CMIS 5.0, IEEE 802.3ck, OSFP Rev5.0 |
Applications
In InfiniBand NDR fabrics, GPU clusters and AI training networks, the 800G OSFP Twin-port OSFP IHS/Finned Top to Twin-port OSFP RHS/Flat Top Active DAC Cable provides a factory terminated 800Gbps (8x 106.25Gbps) link between 800G OSFP (IHS/Finned Top) to 800G OSFP (RHS/Flat Top) ports. This unit is supplied at 1-5m (3ft-16ft). It installs directly into standard ports with no separate transceivers or patch cords to manage at either end. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment.
Standards and Compatibility
Compliance: CMIS 5.0, IEEE 802.3ck, OSFP Rev5.0. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
This model is supplied at 1-5m (3ft-16ft) under part number OSFP-800G-OFLACxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 26-30AWG.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
How We Ship
Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
Packaging
Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.