The 400G OSFP 8 x 50G PAM4 RHS/Flat Top to 2 x 200G QSFP56 4 x 50G PAM4 Active Optical Breakout AOC connects OSFP (RHS/Flat Top) to 2x QSFP56 ports at 400Gbps over Breakout AOC fiber at 850nm. Because the optics are built into the cable ends, installation is plug and play with no separate transceivers to manage, and airflow inside the rack stays unobstructed. It is well suited to 400G Ethernet data center and cloud network environments. Cable length: 3m (10ft).
Product Highlights
- OSFP (RHS/Flat Top) to 2x QSFP56
- Data rate: 400Gbps
- Cable type: Breakout AOC
- Length: 3m (10ft)
- Wavelength: 850nm
- DDM/DOM: Supported
Specifications
| Part Number | OSFPFL-400G-2QAOxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | OSFP (RHS/Flat Top) to 2x QSFP56 |
| Max. Data Rate | 400Gbps |
| Cable Length | 3m (10ft) |
| Cable Type | Breakout AOC |
| Wavelength | 850nm |
| Minimum Bend Radius | 30mm |
| Transmitter Type | VCSEL |
| Receiver Type | PIN |
| Max. Power Consumption | 10W (OSFP End) 5.5W (QSFP56 Per End) |
| Jacket Material | OFNP |
| CDR (Clock and Data Recovery) | TX & RX Built-in CDR |
| Modulation Format | 8x 50G-PAM4 to Dual 4x 50G-PAM4 |
| DDM/DOM | Supported |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Protocols | CMIS 4.0, SFF-8636, IEEE 802.3 bs-2*200GAUI-4, IEEE 802.3 bs-200GAUI-4, OSFP MSA, SFF-8679, SFF-8661 |
Applications
The 400G OSFP 8 x 50G PAM4 RHS/Flat Top to 2 x 200G QSFP56 4 x 50G PAM4 Active Optical Breakout AOC connects OSFP (RHS/Flat Top) to 2x QSFP56 ports at 400Gbps in 400G Ethernet data center and cloud network environments. This unit is supplied at 3m (10ft). One port becomes 2x QSFP56, a common pattern for connecting newer aggregation ports to an installed base of lower speed equipment. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment. The link runs 8x 50G-PAM4 to Dual 4x 50G-PAM4 modulation, which keeps it aligned with current 400G switch silicon.
Standards and Compatibility
Standards compliance covers CMIS 4.0, SFF-8636, IEEE 802.3 bs-2*200GAUI-4, IEEE 802.3 bs-200GAUI-4, OSFP MSA, SFF-8679, SFF-8661. The unit works in any equipment with a standard OSFP (RHS/Flat Top) to 2x QSFP56 interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
This model is supplied at 3m (10ft) under part number OSFPFL-400G-2QAOxxx. Other lengths of the same assembly can be produced on request. Volume pricing is available for project quantities.
OEM and Custom Orders
We have manufactured fiber optic connectivity products since 1995 and run our own production lines in Shenzhen. Beyond the standard catalog we build to order: special cable lengths, custom connector combinations, vendor-specific compatibility coding and private labeling. Send us your requirement and our engineers will quote a practical solution.
Delivery
Goods are normally sent by courier such as DHL, UPS, FedEx, TNT or EMS; air and sea freight are also available on request. Commonly used items are kept in stock for immediate shipment, and out-of-stock items are usually delivered within a few working days. We can also ship on your courier account or hand goods to your appointed forwarder.
Our Testing Process
Production samples and every outgoing batch pass through bit-error-rate measurement, temperature verification and plug-in compatibility checks on mainstream switches and routers. Because we are the manufacturer, any issue found in testing is fed back to the production line immediately instead of being passed on to customers.
Package
Products are first packed into blister trays or self-sealed bags and then into cartons. Standard labels and marks are applied by default, and customized packing and labeling are available on request.