The NVIDIA InfiniBand Compatible 800G OSFP Passive DAC Flat Top is a passive dac direct attach copper cable with OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top), supporting 800Gbps links over a length of 2m (7ft). As a passive cable it draws essentially no power and adds no latency to the link. It is a cost effective, low latency interconnect for InfiniBand NDR fabrics, GPU clusters and AI training networks, and complies with OSFP MSA, CMIS Rev5.0, IEEE 802.3ck.
Product Highlights
- OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top)
- Data rate: 800Gbps
- Cable type: Passive DAC
- Length: choose from 6 standard lengths, 0.5m (2ft) to 3m (10ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFPFL-800G-PC02 |
|---|---|
| Manufacturer | HT |
| Form Factor | OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top) |
| Max. Data Rate | 800Gbps |
| Media | Copper |
| Cable Type | Passive DAC |
| Cable Length | 0.5m (2ft), 1m (3ft), 1.5m (5ft), 2m (7ft), 2.5m (8ft), 3m (10ft) |
| Jacket Material | PVC |
| Minimum Bend Radius | 40.5mm |
| Wire AWG | 28AWG |
| Max. Power Consumption | 0.1W Per End |
| Modulation Format | 8x100G-PAM4 |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Application | 800G InfiniBand |
| Protocols | OSFP MSA, CMIS Rev5.0, IEEE 802.3ck |
Applications
The NVIDIA InfiniBand Compatible 800G OSFP Passive DAC Flat Top is an 800Gbps direct attach copper cable for OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top) connections in InfiniBand NDR fabrics, GPU clusters and AI training networks. This unit is offered in 6 standard lengths from 0.5m (2ft) to 3m (10ft). Because the assembly is factory terminated and tested as a complete link, installation is plug and play on both ends. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment. The link runs 8x100G-PAM4 modulation, which keeps it aligned with current 800G switch silicon.
Standards and Compatibility
This product is designed and tested to comply with OSFP MSA, CMIS Rev5.0, IEEE 802.3ck. It plugs into any standards-based OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top) port, and compatibility coding for specific switch or router brands can be done in our factory before shipment.
Ordering Information
Order this assembly under part number OSFPFL-800G-PC. Available lengths are 0.5m (2ft), 1m (3ft), 1.5m (5ft), 2m (7ft), 2.5m (8ft) and 3m (10ft). If you need a length outside this list, our factory can build it to order. Wire gauge: 28AWG.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
Delivery
Goods are normally sent by courier such as DHL, UPS, FedEx, TNT or EMS; air and sea freight are also available on request. Commonly used items are kept in stock for immediate shipment, and out-of-stock items are usually delivered within a few working days. We can also ship on your courier account or hand goods to your appointed forwarder.
Tested Before Shipment
We do not ship untested stock. Each transceiver and cable is powered up in our test racks, checked for link stability, transmit power, receiver sensitivity and diagnostic readouts, and only then packed for delivery. This factory-level testing is one reason network integrators keep reordering from us year after year.
Packaging Options
Default packaging is simple and protective: sealed bag, blister tray, export carton. For OEM customers we also offer white-label packing, custom printed boxes and per-unit labeling with your own part numbers, so the goods can go straight into your sales channel.