For short reach 200Gbps links in 200G Ethernet data center and cloud network environments, the 200G QSFP-DD to 2 x 100G QSFP28 Passive Copper Breakout DAC Cable offers a factory terminated passive breakout dac assembly with QSFP-DD to 2x QSFP28 connectors and a length of 0.5m (2ft)~3m (10ft). As a passive cable it draws essentially no power and adds no latency to the link. The cable meets QSFP-DD MSA, SFF-8661, IEEE 802.3bs-200GAUI-8, IEEE802.3bm-CAUI-4, CMIS 4.0, SFF-8636.
Product Highlights
- QSFP-DD to 2x QSFP28
- Data rate: 200Gbps
- Cable type: Passive Breakout DAC
- Length: 0.5m (2ft)~3m (10ft)
- DDM/DOM: Not Supported
Specifications
| Part Number | QDD-200G-2Q4xNPCxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP-DD to 2x QSFP28 |
| Max. Data Rate | 200Gbps |
| Media | Copper |
| Cable Type | Passive Breakout DAC |
| Minimum Bend Radius | 35mm |
| Wire AWG | 28~30AWG |
| Cable Length | 0.5m (2ft)~3m (10ft) |
| Jacket Material | PVC |
| Max. Power Consumption | 0.1W (QSFP-DD End) 0.1W (QSFP28 Per End) |
| Modulation Format | QSFP-DD-8x 25G-NRZ QSFP28-4x 25G-NRZ |
| DDM/DOM | Not Supported |
| Protocols | QSFP-DD MSA, SFF-8661, IEEE 802.3bs-200GAUI-8, IEEE802.3bm-CAUI-4, CMIS 4.0, SFF-8636 |
Applications
In 200G Ethernet data center and cloud network environments, the 200G QSFP-DD to 2 x 100G QSFP28 Passive Copper Breakout DAC Cable provides a factory terminated 200Gbps link between QSFP-DD to 2x QSFP28 ports. This unit is supplied at 0.5m (2ft)~3m (10ft). One port becomes 2x QSFP28, a common pattern for connecting newer aggregation ports to an installed base of lower speed equipment. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request.
Standards and Compatibility
Compliance: QSFP-DD MSA, SFF-8661, IEEE 802.3bs-200GAUI-8, IEEE802.3bm-CAUI-4, CMIS 4.0, SFF-8636. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
This model is supplied at 0.5m (2ft)~3m (10ft) under part number QDD-200G-2Q4xNPCxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 28~30AWG.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
How We Ship
Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.
Reliability Control
From incoming component inspection to final burn-in, quality is controlled at each step of production. Finished units are verified on real networking equipment in our compatibility lab, and test records are kept per batch so that any field question can be traced back quickly.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.