The 800G QSFP-DD QDD PCxxx Passive DAC is a passive dac direct attach copper cable with QSFP-DD to QSFP-DD, supporting 800Gbps links over a length of 0.5~1.5m (2~5ft). As a passive cable it draws essentially no power and adds no latency to the link. It is a cost effective, low latency interconnect for 800G Ethernet data center and cloud network environments, and complies with QSFP-DD MSA, CMIS Rev4.0, IEEE 802.3ck.
Product Highlights
- QSFP-DD to QSFP-DD
- Data rate: 800Gbps
- Cable type: Passive DAC
- Length: 0.5~1.5m (2~5ft)
Specifications
| Part Number | QDD-800G-PCxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP-DD to QSFP-DD |
| Max. Data Rate | 800Gbps |
| Media | Copper |
| Cable Type | Passive DAC |
| Cable Length | 0.5~1.5m (2~5ft) |
| Jacket Material | PVC (OFNR) |
| Minimum Bend Radius | 69~81mm |
| Wire AWG | 28~30AWG |
| Max. Power Consumption | 0.005W Per End |
| Modulation Format | 8x 100G-PAM4 |
| Application | 800G Ethernet |
| Protocols | QSFP-DD MSA, CMIS Rev4.0, IEEE 802.3ck |
Applications
Designed for 800G Ethernet data center and cloud network environments, the 800G QSFP-DD QDD PCxxx Passive DAC carries 800Gbps between QSFP-DD to QSFP-DD interfaces. This unit is supplied at 0.5~1.5m (2~5ft). Because the assembly is factory terminated and tested as a complete link, installation is plug and play on both ends. If your project needs a specific vendor coding or custom label, our production line handles it as a routine step before packing.
Standards and Compatibility
Compliance: QSFP-DD MSA, CMIS Rev4.0, IEEE 802.3ck. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
This model is supplied at 0.5~1.5m (2~5ft) under part number QDD-800G-PCxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 28~30AWG.
Worldwide Delivery
We ship to customers around the world every week. Express couriers handle most orders door to door in a few days; larger consignments go by air or sea to keep freight costs down. Tracking information is provided for every shipment, and we are flexible on shipping accounts and forwarders.
Reliability Control
From incoming component inspection to final burn-in, quality is controlled at each step of production. Finished units are verified on real networking equipment in our compatibility lab, and test records are kept per batch so that any field question can be traced back quickly.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.