The 200G QSFP56 4x 50G PAM4 to 2x 100G QSFP28 4x 25G NRZ Breakout AOC, 30m is an active optical cable assembly with QSFP56 to 2x QSFP28, carrying 200Gbps over Breakout AOC at 850nm. Factory terminated and tested as a complete link, it offers a lighter and more flexible alternative to discrete transceivers with patch cords for 200G Ethernet, data center interconnect and 5G transport networks. We keep 2 standard lengths ready, running from 7m (23ft) to 30m (98ft).
Product Highlights
- QSFP56 to 2x QSFP28
- Data rate: 200Gbps
- Cable type: Breakout AOC
- Length: choose from 2 standard lengths, 7m (23ft) to 30m (98ft)
- Wavelength: 850nm
- DDM/DOM: Supported
Specifications
| Part Number | QSFP-200G-2Q4xNAO30 |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP56 to 2x QSFP28 |
| Max. Data Rate | 200Gbps |
| Cable Length | 7m (23ft), 30m (98ft) |
| Cable Type | Breakout AOC |
| Wavelength | 850nm |
| Minimum Bend Radius | 30mm |
| Transmitter Type | VCSEL |
| Receiver Type | PIN |
| Max. Power Consumption | 5.5W (QSFP56 End) 5.5W (QSFP28 Per End) |
| Jacket Material | OFNP |
| Modulation (Electrical) | QSFP56-4x 50G-PAM4 QSFP28-4x 25G-NRZ |
| Modulation (Optical) | QSFP56-4x 50G-PAM4 |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| DDM/DOM | Supported |
| CDR (Clock and Data Recovery) | TX & RX Built-in CDR |
| Inbuilt FEC | Yes |
| Protocols | IEEE 802.3cd-100GAUI-2, IEEE802.3bm-CAUI-4, IEEE 802.3cd, SFF-8661, SFP-8636, SFF-8636 |
Applications
Designed for 200G Ethernet, data center interconnect and 5G transport networks, the 200G QSFP56 4x 50G PAM4 to 2x 100G QSFP28 4x 25G NRZ Breakout AOC, 30m carries 200Gbps between QSFP56 to 2x QSFP28 interfaces. This unit is offered in 2 standard lengths from 7m (23ft) to 30m (98ft). The breakout design lets one high speed port feed 2x QSFP28, which raises port utilization and simplifies cabling in dense rows. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request.
Standards and Compatibility
Standards compliance covers IEEE 802.3cd-100GAUI-2, IEEE802.3bm-CAUI-4, IEEE 802.3cd, SFF-8661, SFP-8636, SFF-8636. The unit works in any equipment with a standard QSFP56 to 2x QSFP28 interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
Order this assembly under part number QSFP-200G-2Q4XNAO. Available lengths are 7m (23ft) and 30m (98ft). If you need a length outside this list, our factory can build it to order. Samples for testing can be arranged before bulk orders.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
Delivery
Goods are normally sent by courier such as DHL, UPS, FedEx, TNT or EMS; air and sea freight are also available on request. Commonly used items are kept in stock for immediate shipment, and out-of-stock items are usually delivered within a few working days. We can also ship on your courier account or hand goods to your appointed forwarder.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
Package
Products are first packed into blister trays or self-sealed bags and then into cartons. Standard labels and marks are applied by default, and customized packing and labeling are available on request.