The 200G QSFP56 to 2 x 100G QSFP28 Active Optical Breakout AOC connects QSFP56 to 2x QSFP28 ports at 200Gbps over Breakout AOC fiber at 850nm. Because the optics are built into the cable ends, installation is plug and play with no separate transceivers to manage, and airflow inside the rack stays unobstructed. It is well suited to 200G Ethernet, data center interconnect and 5G transport networks. Cable length: Customized.
Product Highlights
- QSFP56 to 2x QSFP28
- Data rate: 200Gbps
- Cable type: Breakout AOC
- Length: Customized
- Wavelength: 850nm
- DDM/DOM: Supported
Specifications
| Part Number | QSFP-200G-2Q4xNAOxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP56 to 2x QSFP28 |
| Max. Data Rate | 200Gbps |
| Cable Length | Customized |
| Cable Type | Breakout AOC |
| Wavelength | 850nm |
| Minimum Bend Radius | 30mm |
| Transmitter Type | VCSEL |
| Receiver Type | PIN |
| Max. Power Consumption | 5.5W (QSFP56 End) 5.5W (QSFP28 Per End) |
| Jacket Material | OFNP |
| Modulation (Electrical) | QSFP56-4x 50G-PAM4 QSFP28-4x 25G-NRZ |
| Modulation (Optical) | QSFP56-4x 50G-PAM4 |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| DDM/DOM | Supported |
| CDR (Clock and Data Recovery) | TX & RX Built-in CDR |
| Inbuilt FEC | Yes |
| Protocols | IEEE 802.3cd-100GAUI-2, IEEE802.3bm-CAUI-4, IEEE 802.3cd, SFF-8661, SFP-8636, SFF-8636 |
Applications
In 200G Ethernet, data center interconnect and 5G transport networks, the 200G QSFP56 to 2 x 100G QSFP28 Active Optical Breakout AOC provides a factory terminated 200Gbps link between QSFP56 to 2x QSFP28 ports. Ordered in customized lengths, it matches the actual rack geometry without slack. One port becomes 2x QSFP28, a common pattern for connecting newer aggregation ports to an installed base of lower speed equipment. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment.
Standards and Compatibility
Standards compliance covers IEEE 802.3cd-100GAUI-2, IEEE802.3bm-CAUI-4, IEEE 802.3cd, SFF-8661, SFP-8636, SFF-8636. The unit works in any equipment with a standard QSFP56 to 2x QSFP28 interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
This cable is built to order in customized lengths. Our part number QSFP-200G-2Q4xNAOxxx identifies the configuration. When placing an order, tell us the length you need and any label or packaging requirements.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
Worldwide Delivery
We ship to customers around the world every week. Express couriers handle most orders door to door in a few days; larger consignments go by air or sea to keep freight costs down. Tracking information is provided for every shipment, and we are flexible on shipping accounts and forwarders.
Our Testing Process
Production samples and every outgoing batch pass through bit-error-rate measurement, temperature verification and plug-in compatibility checks on mainstream switches and routers. Because we are the manufacturer, any issue found in testing is fed back to the production line immediately instead of being passed on to customers.