The 200G QSFP56 to 2 x 100G QSFP56 Passive Copper Breakout DAC Cable is a passive twinax direct attach copper cable with QSFP56 to 2 QSFP56, supporting 200Gbps links over a length of Customized. As a passive cable it draws essentially no power and adds no latency to the link. It is a cost effective, low latency interconnect for 200G Ethernet data center and cloud network environments, and complies with IEEE 802.3cd, SFF-8665, QSFP56 MSA.
Product Highlights
- QSFP56 to 2 QSFP56
- Data rate: 200Gbps
- Cable type: Passive Twinax
- Length: Customized
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | QSFP-200G-2QPCxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP56 to 2 QSFP56 |
| Max. Data Rate | 200Gbps |
| Media | Copper |
| Cable Type | Passive Twinax |
| Cable Length | Customized |
| Wire AWG | 30AWG for 0.5m~1.5m, 26AWG for 2m~3m |
| Minimum Bend Radius | 26mm for 0.5m~1.5m, 30mm for 2m~3m |
| Max. Power Consumption | 0.1W (200G End) 0.1W (100G Per End) |
| Jacket Material | PVC (OFNR) |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Protocols | IEEE 802.3cd, SFF-8665, QSFP56 MSA |
Applications
Designed for 200G Ethernet data center and cloud network environments, the 200G QSFP56 to 2 x 100G QSFP56 Passive Copper Breakout DAC Cable carries 200Gbps between QSFP56 to 2 QSFP56 interfaces. Ordered in customized lengths, it matches the actual rack geometry without slack. Because the assembly is factory terminated and tested as a complete link, installation is plug and play on both ends. If your project needs a specific vendor coding or custom label, our production line handles it as a routine step before packing.
Standards and Compatibility
This product is designed and tested to comply with IEEE 802.3cd, SFF-8665, QSFP56 MSA. It plugs into any standards-based QSFP56 to 2 QSFP56 port, and compatibility coding for specific switch or router brands can be done in our factory before shipment.
Ordering Information
This cable is built to order in customized lengths. Our part number QSFP-200G-2QPCxxx identifies the configuration. Wire gauge follows the length: 30AWG for 0.5m~1.5m, 26AWG for 2m~3m. When placing an order, tell us the length you need and any label or packaging requirements. Samples for testing can be arranged before bulk orders.
Quality and Testing
Every unit we ship is tested in our own test bed on mainstream switch and transport platforms before packing. Our test center has been fully upgraded, which sets us apart from other third party product providers: 10G, 40G, 100G, 200G and 400G transceivers and direct attach cables are verified on the latest top brand equipment, including selected original switches that can hardly be found elsewhere.
Packaging Options
Default packaging is simple and protective: sealed bag, blister tray, export carton. For OEM customers we also offer white-label packing, custom printed boxes and per-unit labeling with your own part numbers, so the goods can go straight into your sales channel.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.
Delivery
Goods are normally sent by courier such as DHL, UPS, FedEx, TNT or EMS; air and sea freight are also available on request. Commonly used items are kept in stock for immediate shipment, and out-of-stock items are usually delivered within a few working days. We can also ship on your courier account or hand goods to your appointed forwarder.