The 200G QSFP56 to 4 x 50G SFP56 Passive Copper Breakout DAC Cable provides a 200Gbps copper connection between QSFP56 to 4x SFP56 ports with a cable length of 0.5m (2ft)~3m (10ft). As a passive cable it draws essentially no power and adds no latency to the link. Direct attach copper keeps both latency and power consumption to a minimum, which makes it the economical choice for 200G Ethernet data center and cloud network environments.
Product Highlights
- QSFP56 to 4x SFP56
- Data rate: 200Gbps
- Cable type: Passive Breakout DAC
- Length: 0.5m (2ft)~3m (10ft)
- DDM/DOM: Not Supported
Specifications
| Part Number | QSFP-200G-4SPCxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP56 to 4x SFP56 |
| Max Data Rate | 200Gbps |
| Media | Copper |
| Cable Type | Passive Breakout DAC |
| Minimum Bend Radius | 35mm |
| Wire AWG | 26~30AWG |
| Cable Length | 0.5m (2ft)~3m (10ft) |
| Jacket Material | PVC (OFNR) |
| Max. Power Consumption | 0.1W (QSFP56 End) 0.1W (SFP56 Per End) |
| Modulation Format | QSFP56-4x 50G-PAM4 SFP56-50G-PAM4 |
| DDM/DOM | Not Supported |
| Protocols | SFF-8661, SFF-8432, IEEE 802.3bs-200GAUI-4, IEEE802.3cd-50GAUI-1, SFP-8636, SFF-8472 |
Applications
Designed for 200G Ethernet data center and cloud network environments, the 200G QSFP56 to 4 x 50G SFP56 Passive Copper Breakout DAC Cable carries 200Gbps between QSFP56 to 4x SFP56 interfaces. This unit is supplied at 0.5m (2ft)~3m (10ft). The breakout design lets one high speed port feed 4x SFP56, which raises port utilization and simplifies cabling in dense rows. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request. The link runs QSFP56-4x 50G-PAM4 SFP56-50G-PAM4 modulation, which keeps it aligned with current 200G switch silicon.
Standards and Compatibility
This product is designed and tested to comply with SFF-8661, SFF-8432, IEEE 802.3bs-200GAUI-4, IEEE802.3cd-50GAUI-1, SFP-8636, SFF-8472. It plugs into any standards-based QSFP56 to 4x SFP56 port, and compatibility coding for specific switch or router brands can be done in our factory before shipment.
Ordering Information
This model is supplied at 0.5m (2ft)~3m (10ft) under part number QSFP-200G-4SPCxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 26~30AWG. Samples for testing can be arranged before bulk orders.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
Packing Details
Standard packing is an anti-static bag plus blister protection, with cartons sized to keep products from moving in transit. We apply our standard labels by default; neutral packing or customer-branded labels, part number stickers and serial barcodes are all available on request.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.
Shipping and Lead Time
Standard products are held in stock and usually ship within one to three working days. We dispatch worldwide by DHL, UPS, FedEx, TNT or EMS, and for bulk orders we arrange air or sea freight. Shipments can also be sent collect on your own courier account or delivered to your freight forwarder.