The 200G QSFP56 AOxxx AOC is an active optical cable assembly with QSFP56 to QSFP56, carrying 200Gbps over AOC at 850nm. Factory terminated and tested as a complete link, it offers a lighter and more flexible alternative to discrete transceivers with patch cords for 200G Ethernet data center and cloud network environments. Cable length: 1~100m (3~328ft).
Product Highlights
- QSFP56 to QSFP56
- Data rate: 200Gbps
- Cable type: AOC
- Length: 1~100m (3~328ft)
- Wavelength: 850nm
- DDM/DOM: Supported
Specifications
| Part Number | QSFP-200G-AOxxx |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP56 to QSFP56 |
| Max. Data Rate | 200Gbps |
| Cable Length | 1~100m (3~328ft) |
| Cable Type | AOC |
| Wavelength | 850nm |
| Minimum Bend Radius | 30mm |
| Transmitter Type | VCSEL |
| Receiver Type | PIN |
| Max. Power Consumption | 4.35W Per End |
| Modulation Format | 4x 50G-PAM4 |
| CDR (Clock and Data Recovery) | TX & RX Built-in CDR |
| Jacket Material | LSZH |
| DDM/DOM | Supported |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Protocols | IEEE 802.3, QSFP56 MSA, SFF-8665, SFF-8636 |
| MTBF | ≈3.2 Million Hours |
Applications
The 200G QSFP56 AOxxx AOC is a 200Gbps active optical cable for QSFP56 to QSFP56 connections in 200G Ethernet data center and cloud network environments. This unit is supplied at 1~100m (3~328ft). It installs directly into standard ports with no separate transceivers or patch cords to manage at either end. If your project needs a specific vendor coding or custom label, our production line handles it as a routine step before packing. The link runs 4x 50G-PAM4 modulation, which keeps it aligned with current 200G switch silicon.
Standards and Compatibility
This product is designed and tested to comply with IEEE 802.3, QSFP56 MSA, SFF-8665, SFF-8636. It plugs into any standards-based QSFP56 to QSFP56 port, and compatibility coding for specific switch or router brands can be done in our factory before shipment.
Ordering Information
This model is supplied at 1~100m (3~328ft) under part number QSFP-200G-AOxxx. Other lengths of the same assembly can be produced on request.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
How We Pack
Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
Delivery
Goods are normally sent by courier such as DHL, UPS, FedEx, TNT or EMS; air and sea freight are also available on request. Commonly used items are kept in stock for immediate shipment, and out-of-stock items are usually delivered within a few working days. We can also ship on your courier account or hand goods to your appointed forwarder.