Built for 400G Ethernet data center and cloud network environments, the 400G QSFP112 AExxx AEC delivers 400Gbps between QSFP112 to QSFP112 interfaces over Active DAC (AEC) fiber at 850nm. The integrated design removes the need for separate optical modules and simplifies sparing. Cable length: 1m (3ft)~3m (10ft).
Product Highlights
- QSFP112 to QSFP112
- Data rate: 400Gbps
- Cable type: Active DAC (AEC)
- Length: 1m (3ft)~3m (10ft)
- DDM/DOM: Supported
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | QSFP-400G-AExxx |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP112 to QSFP112 |
| Max. Data Rate | 400Gbps |
| Media | Copper |
| Cable Type | Active DAC (AEC) |
| Minimum Bend Radius | 26.5mm |
| Wire AWG | 32AWG |
| Cable Length | 1m (3ft)~3m (10ft) |
| Jacket Material | PET |
| Power Consumption | <8W Per End |
| Modulation Format | 4x 100G-PAM4 |
| DDM/DOM | Supported |
| Temperature Range | 0 to 70°C (32 to 158°F) |
| Protocols | QSFP112 MSA, IEEE 802.3ck 400GBase-CR4, CMIS 5.0 |
Applications
The 400G QSFP112 AExxx AEC connects QSFP112 to QSFP112 ports at 400Gbps in 400G Ethernet data center and cloud network environments. This unit is supplied at 1m (3ft)~3m (10ft). Because the assembly is factory terminated and tested as a complete link, installation is plug and play on both ends. If your project needs a specific vendor coding or custom label, our production line handles it as a routine step before packing. The link runs 4x 100G-PAM4 modulation, which keeps it aligned with current 400G switch silicon.
Standards and Compatibility
Standards compliance covers QSFP112 MSA, IEEE 802.3ck 400GBase-CR4, CMIS 5.0. The unit works in any equipment with a standard QSFP112 to QSFP112 interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
This model is supplied at 1m (3ft)~3m (10ft) under part number QSFP-400G-AExxx. Other lengths of the same assembly can be produced on request. Wire gauge: 32AWG.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
Packaging
Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
Delivery
Goods are normally sent by courier such as DHL, UPS, FedEx, TNT or EMS; air and sea freight are also available on request. Commonly used items are kept in stock for immediate shipment, and out-of-stock items are usually delivered within a few working days. We can also ship on your courier account or hand goods to your appointed forwarder.