The 100G QSFP28 SR4 4x 25G NRZ 850nm 100m MPO-12/UPC Enhanced InfiniBand EDR, NVIDIA (IB) is a QSFP28 optical transceiver delivering 100Gbps over MMF. Operating at 850nm with a MPO-12/UPC interface, it reaches 70m@OM3/100m@OM4 and is compliant with IEEE 802.3bm, 100GBASE-SR4, SFF-8636. Built-in digital diagnostics give real-time access to operating parameters, making the module easy to deploy and maintain in 100G Ethernet, data center interconnect and 5G transport networks.
Product Highlights
- QSFP28 form factor, 100Gbps data rate
- Wavelength: 850nm
- Connector: MPO-12/UPC
- Reach: up to 70m@OM3/100m@OM4
- Fiber media: MMF
- DDM/DOM: Supported
Specifications
| Part Number | QSFP-SR4-100G-E |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP28 |
| Max. Data Rate | 100Gbps |
| Wavelength | 850nm |
| Max. Cable Distance | 70m@OM3/100m@OM4 |
| Connector | MPO-12/UPC |
| Media | MMF |
| Transmitter Type | VCSEL |
| Receiver Type | PIN |
| TX Power | -8.4~2.4dBm |
| Minimum Receiver Power | -10.3dBm (with FEC)-5.9dBm (without FEC) |
| Power Budget | 1.9dB |
| Receiver Overload | 2.4dBm |
| Max. Power Consumption | 2.5W |
| Extinction Ratio | ≥2dB |
| DDM/DOM | Supported |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Modulation (Electrical) | 4x 25G-NRZ |
| Modulation (Optical) | 4x 25G-NRZ |
| CDR (Clock and Data Recovery) | TX & RX Built-in CDR |
| Inbuilt FEC | No |
| Bit Error Ratio (BER) | 1E-12 |
| Packaging Technology | COB (Chip on Board) Packaging |
| Protocols | IEEE 802.3bm, 100GBASE-SR4, SFF-8636 |
Applications
Built for 100G Ethernet, data center interconnect and 5G transport networks, this QSFP28 module carries 100Gbps over MMF up to 70m@OM3/100m@OM4 per link. Digital diagnostics report transmit power, receive power and temperature in real time, which simplifies commissioning and ongoing maintenance. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment.
Standards and Compatibility
Compliance: IEEE 802.3bm, 100GBASE-SR4, SFF-8636. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.
Ordering Information
Our part number for this module is QSFP-SR4-100G-E. When ordering, just let us know the quantity and whether you need the compatibility coding for a particular switch brand; labeling and packaging can also follow your channel requirements.
Customization Service
Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.
Shipping and Lead Time
Standard products are held in stock and usually ship within one to three working days. We dispatch worldwide by DHL, UPS, FedEx, TNT or EMS, and for bulk orders we arrange air or sea freight. Shipments can also be sent collect on your own courier account or delivered to your freight forwarder.
Tested Before Shipment
We do not ship untested stock. Each transceiver and cable is powered up in our test racks, checked for link stability, transmit power, receiver sensitivity and diagnostic readouts, and only then packed for delivery. This factory-level testing is one reason network integrators keep reordering from us year after year.
Packaging
Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.