This MTP® Elite Female pigtail carries 12 Fibers on OS2 9/125μm ribbon fiber, ready for mass fusion splicing inside a fiber enclosure or splice tray. Factory polished connector geometry gives you a low loss joint every time.
Standard lengths are 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft), 30m (98ft) and 40m (131ft). Because we are the manufacturer, any other length between or beyond these steps can be produced on request, with your choice of jacket color, labeling and packaging.
Product Highlights
- MTP® Elite Female (Non-Pinned) to Unterminated, 12 Fibers
- OS2 9/125μm, G.657.A1
- Insertion loss ≤0.35dB (0.15dB Typ.), return loss ≥65dB
- Unjacketed
- Minimum bend radius 10mm
- Ten standard lengths from 1m (3ft) to 40m (131ft), custom lengths built to order
Specifications
| Part Number | 12SM-MTPA-1M-F |
|---|---|
| Manufacturer | HT |
| Connector A | US Conec MTP® Elite Female (Non-Pinned) |
| Connector B | Unterminated |
| Fiber Mode | OS2 9/125μm |
| Wavelength | 1310/1550nm |
| Polish Type | APC |
| Fiber Count | 12 Fibers |
| Cable Jacket | Unjacketed |
| Cable Structure | Bare Ribbon Fiber |
| Glass Fiber | G.657.A1 |
| Min. Bend Radius | 10mm |
| Connector Durability | 500 times |
| Tensile Strength | 80/240N (Long/Short Term) |
| Insertion Loss | ≤0.35dB (0.15dB Typ.) |
| Return Loss | ≥65dB |
| Attenuation at 1310nm | ≤0.35dB/km |
| Attenuation at 1550nm | ≤0.21dB/km |
| Operating Temperature | -60 to 85°C (-76 to 185℉) |
| Storage Temperature | -60 to 85°C (-76 to 185℉) |
Applications
Use this pigtail inside splice enclosures, ODFs and termination boxes where field cable needs factory quality connectors. A 12-fiber MPO interface carries 8 active lanes for 40G SR4 and 100G SR4 links, leaving the remaining 4 fibers dark, exactly as the MSA wiring specifies. Mass fusion splicing the ribbon completes twelve fibers in one operation.
Ribbon and Splice Details
The bare ribbon end is color coded to the standard 12-fiber sequence, which makes mass fusion splicing quick and unambiguous. Each ribbon is stripped and prepared in the factory for consistent splice results in the field.
Ordering Information
Ordering is simple: send us 12SM-MTPA-1M-F and your required lengths and quantities, and we return a factory quote the same working day. The 1m (3ft) version is the standard model; Small trial orders are welcome before you commit to a full project rollout.
How We Pack
Every cable is protected with dust caps and individual packaging before being boxed for shipment. Batch test reports and your own part number labels can be included in each bag.
Built to Your Spec
As a factory we can modify almost every detail of this product: length, jacket material and color, polarity, gender, breakout geometry, labeling and packaging. Non-standard variants are routine work for us, not a special project.
Logistics
Most orders leave our facility within a few working days. Courier, air freight and sea freight are all available, and we are happy to hand goods to your nominated forwarder in China.