The 1.6T OSFP224 DR8 FL Optical Transceiver is a hot-pluggable Twin-port OSFP RHS/Flat Top transceiver rated at 1600Gbps. Using a Dual MTP/MPO-12 APC optical interface over SMF at 1310nm, it covers transmission distances up to 500m. Compliance with OSFP MSA Rev 5.1, CMIS Rev 5.3, IEEE 802.3dj D1p3, IEEE 802.3dj D1p3, together with integrated diagnostic monitoring, makes it a dependable choice for 1.6T Ethernet data centers, HPC and machine learning clusters.
Product Highlights
- Twin-port OSFP RHS/Flat Top form factor, 1600Gbps data rate
- Wavelength: 1310nm
- Connector: Dual MTP/MPO-12 APC
- Reach: up to 500m
- Fiber media: SMF
Specifications
| Part Number | OSFP-DR8-1.6T-FL |
|---|---|
| Manufacturer | HT |
| Form Factor | Twin-port OSFP RHS/Flat Top |
| Max. Data Rate | 1600Gbps |
| Wavelength | 1310nm |
| Max. Cable Distance | 500m |
| Connector | Dual MTP/MPO-12 APC |
| Media | SMF |
| Transmitter Type | EML |
| Receiver Type | PIN |
| TX Power | -3.3~4dBm |
| Minimum Receiver Power | -6.3dBm |
| Power Budget | 3dB |
| Receiver Overload | 4dBm |
| Max. Power Consumption | 30W |
| Extinction Ratio | ≥3.5dB |
| Modulation (Electrical) | 8x 200G-PAM4 |
| Modulation (Optical) | Dual 4x 200G-PAM4 |
| Packaging Technology | COB (Chip on Board) Packaging |
| Modulation Format | PAM4 |
| CDR (Clock and Data Recovery) | TX & RX Built-in DSP |
| Inbuilt FEC | No |
| Protocols | OSFP MSA Rev 5.1, CMIS Rev 5.3, IEEE 802.3dj D1p3, IEEE 802.3dj D1p3 |
Applications
In 1.6T Ethernet data centers, HPC and machine learning clusters, the 1.6T OSFP224 DR8 FL Optical Transceiver delivers 1600Gbps transmission over SMF with a reach of 500m. Digital diagnostics report transmit power, receive power and temperature in real time, which simplifies commissioning and ongoing maintenance. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request. The link runs PAM4 modulation, which keeps it aligned with current 1.6T switch silicon.
Standards and Compatibility
This product is designed and tested to comply with OSFP MSA Rev 5.1, CMIS Rev 5.3, IEEE 802.3dj D1p3, IEEE 802.3dj D1p3. It plugs into any standards-based Twin-port OSFP RHS/Flat Top port, and compatibility coding for specific switch or router brands can be done in our factory before shipment.
Ordering Information
Order this product as OSFP-DR8-1.6T-FL. Common models are stocked for fast dispatch. We can supply the module with neutral or customer-branded labels, and compatibility coding for a specific equipment vendor can be added at no extra process step.
OEM and Custom Orders
We have manufactured fiber optic connectivity products since 1995 and run our own production lines in Shenzhen. Beyond the standard catalog we build to order: special cable lengths, custom connector combinations, vendor-specific compatibility coding and private labeling. Send us your requirement and our engineers will quote a practical solution.
Logistics
Our warehouse keeps fast-moving transceivers and cables ready for same-week dispatch. Courier, air freight and sea freight options are all available depending on your budget and schedule, and we consolidate multiple items into one shipment whenever it saves you cost.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.
Packaging
Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.