The 1.6T OSFP224 Active DAC Cable Flat Top, 1m provides a 1600Gbps copper connection between OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top) ports with a cable length of 1m (3ft). Active electronics inside the connectors extend the usable reach compared with passive copper while keeping power draw low. Direct attach copper keeps both latency and power consumption to a minimum, which makes it the economical choice for 1.6T Ethernet data center and cloud network environments.
Product Highlights
- OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top)
- Data rate: 1600Gbps
- Cable type: Active DAC (ACC)
- Length: choose from 2 standard lengths, 1m (3ft) to 2m (7ft)
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| Part Number | OSFPFL-1.6T-AC01 |
|---|---|
| Manufacturer | HT |
| Form Factor | OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top) |
| Max. Data Rate | 1600Gbps |
| Media | Copper |
| Cable Type | Active DAC (ACC) |
| Cable Length | 1m (3ft), 2m (7ft) |
| Jacket Material | LSZH |
| Minimum Bend Radius | 60mm |
| Wire AWG | 25AWG |
| Max. Power Consumption | 2.5W Per End |
| Modulation Format | 8x 200G-PAM4 to 8x 200G-PAM4 |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Application | 1.6T Ethernet |
| Protocols | OSFP Rev 5.2, CMIS 5.0, IEEE 802.3df and 802.3dj |
Applications
The 1.6T OSFP224 Active DAC Cable Flat Top, 1m is a 1600Gbps active copper cable for OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top) connections in 1.6T Ethernet data center and cloud network environments. This unit is offered in 2 standard lengths from 1m (3ft) to 2m (7ft). The integrated construction removes separate optics from the link budget and reduces the number of failure points in the row. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment. The link runs 8x 200G-PAM4 to 8x 200G-PAM4 modulation, which keeps it aligned with current 1.6T switch silicon.
Standards and Compatibility
Standards compliance covers OSFP Rev 5.2, CMIS 5.0, IEEE 802.3df and 802.3dj. The unit works in any equipment with a standard OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top) interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.
Ordering Information
Order this assembly under part number OSFPFL-1.6T-AC. Available lengths are 1m (3ft) and 2m (7ft). If you need a length outside this list, our factory can build it to order. Wire gauge: 25AWG. Samples for testing can be arranged before bulk orders.
Packing Details
Standard packing is an anti-static bag plus blister protection, with cartons sized to keep products from moving in transit. We apply our standard labels by default; neutral packing or customer-branded labels, part number stickers and serial barcodes are all available on request.
Built to Your Spec
Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.
Shipping and Lead Time
Standard products are held in stock and usually ship within one to three working days. We dispatch worldwide by DHL, UPS, FedEx, TNT or EMS, and for bulk orders we arrange air or sea freight. Shipments can also be sent collect on your own courier account or delivered to your freight forwarder.
Quality Assurance
Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.