Nokia QSFP-ZR-100G-S-I Compatible 100G QSFP28 Transceiver Module
The QSFP-ZR-100G-S-I compatible module serves equipment requiring a 100G QSFP28 interface with C-Band 5THz DWDM Tunable optics and a 80km (unamplified)300km (amplified) rating. Connection is through Duplex LC/UPC. Product data, application guidance and factory verification are presented together to support procurement teams match an equipment parts list to a clearly defined optical product.
OEM Part Number: QSFP-ZR-100G-S-IHT Part Number: QSFP-ZR-100G-S-I
Product Highlights
- Compatible alternative to Nokia QSFP-ZR-100G-S-I
- 100G connectivity at 100Gbps
- Optical wavelength: C-Band 5THz DWDM Tunable
- Specified reach: 80km (unamplified)300km (amplified)
- Duplex LC/UPC / Duplex SMF interface
- Operating temperature: -40 to 85°C (-40 to 185°F)
- Factory compatibility verification and optical performance testing before shipment
Specifications
| HT Part Number | QSFP-ZR-100G-S-I |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP28 |
| Data Rate | 100Gbps |
| Wavelength | C-Band 5THz DWDM Tunable |
| Distance | 80km (unamplified)300km (amplified) |
| Connector | Duplex LC/UPC |
| Media | Duplex SMF |
| Power Consumption | ≤6W |
| Management Interface | CMIS |
| TX Power | -8~-4dBm |
| RX Power | -30~3dBm |
| Transmitter | Tunable |
| Receiver | Coherent |
| Client Side | OTN OTU4 |
| Protocols | IEEE 802.3™-2022, 100GBASE-ZR, CMIS, SFF-8024 |
| Host Side FEC Mode | RS (528,514) / RS (255,239) |
| Line Side FEC Mode | SC / RS (255,239) |
| Host Side Modulation Format | NRZ |
| Line Side Modulation Format | DP- DQPSK |
| Relative Humidity | 5~95% (Non-condensing) |
| Operating Temperature | -40 to 85°C (-40 to 185°F) |
Applications and Optical Link Design
This coherent interface is suited to data-center interconnect, metro transport and managed DWDM links where the host platform supports the stated modulation and FEC modes. Design the optical line around the actual launch power, receiver range, OSNR requirement and span loss; the stated reach is not a substitute for a link-budget calculation. Use matching coherent modules and the appropriate DWDM channel plan at both ends.
The industrial temperature rating makes this version appropriate for controlled outdoor cabinets, transport nodes and other installations exposed to wider ambient temperature variation. Adequate airflow, protected cable routing and host-platform temperature limits still apply.
For this coherent interface, document the wavelength plan and modulation or FEC settings before commissioning. Measure span loss and verify adequate OSNR. Interoperability depends on compatible coherent modes as well as form factor, so another coherent part number must not be substituted without engineering review.
Optical Acceptance, Diagnostics and Handling
For this model, the specified transmit-power range is -8~-4dBm. Digital diagnostics make later maintenance easier when baseline values are captured at installation. Save the initial readings with the port and OEM reference, then investigate meaningful changes rather than reacting to a single transient value. Diagnostic support depends on the host as well as the module, so unavailable fields should be confirmed with the platform documentation. Before every insertion, keep dust caps in place until the patch lead is ready, avoid touching the optical end face and use an appropriate inspection and cleaning procedure. Do not look into an active optical interface.
Procurement and Asset Identification
A useful purchase order identifies the host platform, expected OEM code and optical standard separately. This prevents a module with the same housing but another wavelength, reach or identification profile from being substituted. For mixed deployments, keep one order line per OEM reference and reconcile each received unit with its intended port. For this model, the principal parameters are data rate 100Gbps, wavelength C-Band 5THz DWDM Tunable, rated reach 80km (unamplified)300km (amplified).
Nokia Compatibility and Factory Testing
Factory verification starts with the expected QSFP-ZR-100G-S-I identity and finishes with an operating host link. EEPROM data, diagnostic visibility and the stated optical parameters are assessed together. Equipment model, hardware revision and software release can be reviewed before dispatch where platform behavior is uncertain.
Ordering Information
Quote HT part number QSFP-ZR-100G-S-I together with OEM reference QSFP-ZR-100G-S-I and quantity. Add the host model and software release when pre-order verification is required. Neutral labels, customer packaging and project-specific compatibility review are available on request.
Quality Assurance and Packaging
Before packing, the module receives interface inspection, identification and link checks. Protective packaging avoids pressure on the connector and latch. Customer references, rack groups and project packing lists can be added for volume orders.
Frequently Asked Questions
Is this an original Nokia transceiver?
No. It is an HT-manufactured compatible alternative for equipment that specifies QSFP-ZR-100G-S-I, not an original Nokia-branded module.
Which fiber and connector are required?
Use Duplex LC/UPC with Duplex SMF. The specified maximum reach is 80km (unamplified)300km (amplified), subject to fiber quality and total link loss.
Can it be mixed with another wavelength or reach version?
Only when the two ends share the same optical standard, wavelength plan and supported data rate. Check the exact part numbers and link budget rather than relying only on the module form factor.
Shipping and Lead Time
Standard configurations normally ship within one to three working days, with production lead times confirmed for larger quantities. International courier, air freight and sea freight are available; customer courier accounts and nominated forwarders are accepted.