Juniper Networks QSFP-ZRHF-100G-S Compatible 100G QSFP28 Transceiver Module
Built for hosts recognizing QSFP-ZRHF-100G-S, this HT-manufactured QSFP28 module delivers 100G transmission at 100GHz gird: 1528.77~1566.31nm50GHz gird: 1528.77~1566.72nm. Its rated reach is unamplified: ≤120kmamplified: ≤300km, with Duplex LC/UPC as the physical interface. The specifications and engineering guidance below support procurement teams match an equipment parts list to a clearly defined optical product, while keeping HT manufacture separate from the OEM cross-reference.
OEM Part Number: QSFP-ZRHF-100G-SHT Part Number: QSFP-ZRH-100G
Product Highlights
- Compatible alternative to Juniper Networks QSFP-ZRHF-100G-S
- 100G connectivity at 100Gbps
- Optical wavelength: 100GHz gird: 1528.77~1566.31nm50GHz gird: 1528.77~1566.72nm
- Specified reach: unamplified: ≤120kmamplified: ≤300km
- Duplex LC/UPC / Duplex SMF interface
- Digital diagnostic monitoring: Supported
- Operating temperature: 0 to 70°C (32 to 158°F)
Specifications
| HT Part Number | QSFP-ZRH-100G |
|---|---|
| Manufacturer | HT |
| Form Factor | QSFP28 |
| Max. Data Rate | 100Gbps |
| Wavelength | 100GHz gird: 1528.77~1566.31nm50GHz gird: 1528.77~1566.72nm |
| Max. Cable Distance | unamplified: ≤120kmamplified: ≤300km |
| Connector | Duplex LC/UPC |
| Media | Duplex SMF |
| Transmitter Type | Tunable |
| Receiver Type | Coherent |
| TX Power | 0dBm |
| Minimum Receiver Power | unamplified: -30dB |
| Power Budget | unamplified: 30dB |
| Receiver Overload | unamplified: 1dBmamplified: 3dBm |
| Max. Power Consumption | Typical: <6.0WMax: <6.5W |
| Inbuilt FEC | Host: RS FEC or NoneMedia: SC FEC |
| DDM/DOM | Supported |
| Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| CD Robustness | Default, OSNR penalty < 0.5dB: 2.4 ns/nm Extended, OSNR penalty < 1.0dB: 6.0 ns/nm |
| OSNR Tolerance | 100G DQPSK SC: ≤16.5 dB/12.5GHz: ≤21.5 dB/12.5GHz |
| Modulation Format | 4x 25G NRZ, DP-DQPSK |
| Protocols | IEEE 802.3™-2022, 100GBASE-ZR, CMIS, SFF-8024 |
Applications and Optical Link Design
This coherent interface is suited to data-center interconnect, metro transport and managed DWDM links where the host platform supports the stated modulation and FEC modes. Design the optical line around the actual launch power, receiver range, OSNR requirement and span loss; the stated reach is not a substitute for a link-budget calculation. Use matching coherent modules and the appropriate DWDM channel plan at both ends.
Before deployment, check the host port type, supported data rate and firmware requirements. The 100G interface configuration must match the remote equipment; sharing a QSFP28 housing alone does not make two transceiver types interoperable.
For this coherent interface, document the wavelength plan and modulation or FEC settings before commissioning. Measure span loss and verify adequate OSNR. Interoperability depends on compatible coherent modes as well as form factor, so another coherent part number must not be substituted without engineering review.
Optical Acceptance, Diagnostics and Handling
For this model, the specified transmit-power range is 0dBm; the stated optical power budget is unamplified: 30dB. During commissioning, record the host diagnostic readings after the link has stabilized and compare them with those limits. DOM values are useful operational indicators, but they do not replace calibrated optical measurements when a link is marginal. Investigate unexpected loss through connector inspection, cleaning and a channel measurement before replacing the module. Diagnostic monitoring is listed as Supported. Before every insertion, keep dust caps in place until the patch lead is ready, avoid touching the optical end face and use an appropriate inspection and cleaning procedure. Do not look into an active optical interface.
Procurement and Asset Identification
A useful purchase order identifies the host platform, expected OEM code and optical standard separately. This prevents a module with the same housing but another wavelength, reach or identification profile from being substituted. For mixed deployments, keep one order line per OEM reference and reconcile each received unit with its intended port. For this model, the principal parameters are data rate 100Gbps, wavelength 100GHz gird: 1528.77~1566.31nm50GHz gird: 1528.77~1566.72nm, rated reach unamplified: ≤120kmamplified: ≤300km.
Juniper Networks Compatibility and Factory Testing
The module is checked for host recognition as QSFP-ZRHF-100G-S, link establishment and diagnostic reporting. Physical cage fit alone is not treated as evidence of compatibility. Equipment model, hardware revision and software release can be reviewed before dispatch where platform behavior is uncertain.
Ordering Information
Quote HT part number QSFP-ZRH-100G together with OEM reference QSFP-ZRHF-100G-S and quantity. Add the host model and software release when pre-order verification is required. Neutral labels, customer packaging and project-specific compatibility review are available on request.
Quality Assurance and Packaging
Each QSFP-ZRHF-100G-S compatible module is inspected, powered up and functionally checked before protective packing. Dust caps and individual trays shield the interface during transport. Customer references, rack groups and project packing lists can be added for volume orders.
Frequently Asked Questions
Is this an original Juniper Networks transceiver?
No. It is an HT-manufactured compatible alternative for equipment that specifies QSFP-ZRHF-100G-S, not an original Juniper Networks-branded module.
Which fiber and connector are required?
Use Duplex LC/UPC with Duplex SMF. The specified maximum reach is unamplified: ≤120kmamplified: ≤300km, subject to fiber quality and total link loss.
Can it be mixed with another wavelength or reach version?
Only when the two ends share the same optical standard, wavelength plan and supported data rate. Check the exact part numbers and link budget rather than relying only on the module form factor.
Shipping and Lead Time
Standard configurations normally ship within one to three working days, with production lead times confirmed for larger quantities. International courier, air freight and sea freight are available; customer courier accounts and nominated forwarders are accepted.